Ports of Genio 350-EVK

With rity-demo-image, there are several options to connect your host PC to the Genio 350-EVK:

  • Connect to UART Port: The UART0 port provides access to bootloader and kernel console with rity-demo-image.

  • USB: The SoC USB0 port is a micro-USB connector lablled as USB0 on Genio 350-EVK. It supports following functions:

    • RNDIS (Windows): The USB0 port is configured as an RNDIS device, to provide “virtual” ethernet connections to the board with USB cable.

    • ADB: The USB0 port is also configured as an Android Debugging Bridge(ADB) device.

The location of the UART0 and USB0 ports on Genio 350-EVK are shown below:

Ports of |i350-EVK-REF-BOARD| main board

Location of UART0, USB0, and LAN port in Genio 350-EVK