Genio 720-EVK
Genio 720-EVK board is an evaluation kit of MediaTek MT8391 platform, which is a high performance IoT platform with rich features. This section describes board features that are relevant to Android.
Documentation
For Genio 720-EVK hardware documentation and the EVK User Guide, please visit the IoT Developer Home page.
|
|
Genio 720-EVK Ports
Ports of Genio 720-EVK main board
Ports on the bottom side of Genio 720-EVK main board
Block Diagram
Block Diagram
Packing List
No. |
Part Number or Marketing |
Item Name |
Description |
Quantity |
|---|---|---|---|---|
1 |
Genio 720 EVK-P2V3 |
Genio 720 EVK Main Board |
1 |
|
2 |
IoT-CAM-DTB-D8V2 |
Camera Board (D8 Version) |
1 |
|
3 |
Camera Module for D8 |
IMX258 Camera Module |
1 |
|
4 |
IoT-CAM-DTB-D9V2 |
Camera Board (D9 Version) |
1 |
|
5 |
Camera Module for D9 |
OV5640 Camera Module |
1 |
|
6 |
CAM-DTB-FPC-V2 |
FPC for Camera Board |
FPC is Suitable for Both D8 and D9 Camera Boards |
2 |
7 |
7” LCD Panel |
With Touch Panel and FPC Cable |
1 |
|
8 |
AW-XB468NF |
Wi-Fi Module |
M.2 Wi-Fi 6 Module (IC: MT7921L) |
1 |
9 |
Wi-Fi Antenna |
SMA Antenna |
2 |
|
10 |
EA1062SBR |
USB Type-C Power Adapter |
1 |
Description of kit contents
Genio 720 EVK Main Motherboard
These images show the main motherboard and relevant IO.
Genio 720-EVK Top View Main Motherboard
Genio 720-EVK Bottom View Main Motherboard
D8 Camera Board
The D8 camera board is integrated with a SONY IMX258 image sensor chip, which is a high-performance camera image processor with rich features.
D8 Camera Board
D9 Camera Board
The D9 camera board is integrated with an OmniVision OV5640 image sensor chip, which is a high-performance camera image processor with rich features.
D9 Camera Board
Board Feature Summary
At the current release, Android enables the following board features:
Supported Board Features
MediaTek CPU MT8391AV/AZA
MediaTek PMIC (MT6365ICW/B)
MediaTek Charger (MT6375P/A)
8GB LPDDR5 RAM (Micron MT62F2G32D4DS-023 IT:C)
64GB eMMC x 1 (Micron MTFC64GBCAQTC-IT)
128GB UFS x 1 (Western Digital SDINFD04-128)
Φ2.0 DC Jack x 1 (Supports 20V DC Input)
USB Type-C Power Adapter (20V PD Adapter)
Micro SD Card Connector x 1
Push Button x 4 (Power, Reset, Home and Download)
LED x 3 (System Power, Reset, DC-IN Power)
4-lane MIPI DSI x 1 (MUX)
4-lane MIPI CSI x 2
DP x 1 (Mode over USB Type-C)
LVDS x 1 (MUX)
eDP x 1
10/100/1000M Ethernet x 1 (Airoha AN8801RIN/A)
USB Type-C Connector (UART) x 2 - UART Port for Trace Log with USB to UART Bridge IC
USB Type-C Connector (USB 3.2) x 2
USB Type-C Connector (USB 2.0) x 1
3.5mm Earphone Jack x 1 (with Microphone Input)
3.5mm Line Out Audio Jack x 1
Analog Microphone x 2 (Merry MMA102-006)
Digital Microphone x 2 (Merry MMD300-007)
UART Port x 4 (USB Port x 2, Pin Header x 2)
M.2 Slot Key E x 2 - For AzureWave AW-XB468NF Wi-Fi 6 & BT 5.2 Module - For Sona MT320 2230 Wi-Fi 6 & BT 5.4 Module - The M.2 slot designed on the EVK complies with the M.2 standard pin definition. Please ask the customer to confirm whether their M.2 module meets the M.2 standard pin definition
M.2 Slot Key B x 1 - The M.2 slot designed on the EVK complies with the M.2 standard pin definition. Please ask the customer to confirm whether their M.2 module meets the M.2 standard pin definition
40-Pin 2.54mm Pin Header x 1 (for Raspberry Pi Like I/O Interface)
Micro SIM x 1
Nano SIM x 1
CAN Bus x 1 (RS232 Connector)
Unsupported Board Features
Please refer to Android Releases section for detailed list on supported features.
FTDI board control
The Genio 720-EVK has a FTDI FT232R chip connected to the UART0 (CN3200) port. You can control the power (PWRKEY), reset (SYSRST), and download (KPCOL0) lines through the CBUS lines of the FT232R chip:
FTDI GPIO Line |
Function |
|---|---|
0 |
Power (PWRKEY) |
1 |
Reset (SYSRST) |
2 |
Download (KPCOL0) |