Genio 520-EVK

Genio 520-EVK board is an evaluation kit of MediaTek MT8371 platform, which is a high performance IoT platform with rich features. This section describes board features that are relevant to Android.

Documentation

For Genio 520-EVK hardware documentation and the EVK User Guide, please visit the IoT Developer Home page.

Genio 520-EVK

Genio 520-EVK Ports

Ports of |G520-EVK| main board — Ports of Genio 520-EVK main board

Ports of |G520-EVK-REF-BOARD| main board — Ports on the bottom side of Genio 520-EVK main board

Block Diagram

Packing List

No.	Part Number or Marketing	Item Name	Description	Quantity
1	Genio 520 EVK-P2V3	Genio 520 EVK Main Board		1
2	IoT-CAM-DTB-D8V2	Camera Board (D8 Version)		1
3		Camera Module for D8	IMX258 Camera Module	1
4	IoT-CAM-DTB-D9V2	Camera Board (D9 Version)		1
5		Camera Module for D9	OV5640 Camera Module	1
6	CAM-DTB-FPC-V2	FPC for Camera Board	FPC is Suitable for Both D8 and D9 Camera Boards	2
7		7” LCD Panel	With Touch Panel and FPC Cable	1
8	AW-XB468NF	Wi-Fi Module	M.2 Wi-Fi 6 Module (IC: MT7921L)	1
9		Wi-Fi Antenna	SMA Antenna	2
10	EA1062SBR	USB Type-C Power Adapter		1

Description of kit contents

Genio 520 EVK Main Motherboard

These images show the main motherboard and relevant IO.

../_images/hw_evk_g520-evk_ports1.svg — Genio 520-EVK Top View Main Motherboard

../_images/hw_evk_g520-evk_bottom-view1.svg — Genio 520-EVK Bottom View Main Motherboard

D8 Camera Board

The D8 camera board is integrated with a SONY IMX258 image sensor chip, which is a high-performance camera image processor with rich features.

../_images/D8_Camera_Setup.jpg — D8 Camera Board

D9 Camera Board

The D9 camera board is integrated with an OmniVision OV5640 image sensor chip, which is a high-performance camera image processor with rich features.

../_images/D9_Camera_Setup.jpg — D9 Camera Board

Board Feature Summary

At the current release, Android enables the following board features:

Supported Board Features

MediaTek CPU MT8371AV/AZA
MediaTek PMIC (MT6365ICW/B)
MediaTek Charger (MT6375P/A)
8GB LPDDR5 RAM (Micron MT62F2G32D4DS-023 IT:C)
64GB eMMC x 1 (Micron MTFC64GBCAQTC-IT)
128GB UFS x 1 (Western Digital SDINFD04-128)
Φ2.0 DC Jack x 1 (Supports 20V DC Input)
USB Type-C Power Adapter (20V PD Adapter)
Micro SD Card Connector x 1
Push Button x 4 (Power, Reset, Home and Download)
LED x 3 (System Power, Reset, DC-IN Power)
4-lane MIPI DSI x 1 (MUX)
4-lane MIPI CSI x 2
DP x 1 (Mode over USB Type-C)
LVDS x 1 (MUX)
eDP x 1
10/100/1000M Ethernet x 1 (Airoha AN8801RIN/A)
USB Type-C Connector (UART) x 2 - UART Port for Trace Log with USB to UART Bridge IC
USB Type-C Connector (USB 3.2) x 2
USB Type-C Connector (USB 2.0) x 1
3.5mm Earphone Jack x 1 (with Microphone Input)
3.5mm Line Out Audio Jack x 1
Analog Microphone x 2 (Merry MMA102-006)
Digital Microphone x 2 (Merry MMD300-007)
UART Port x 4 (USB Port x 2, Pin Header x 2)
M.2 Slot Key E x 2 - For AzureWave AW-XB468NF Wi-Fi 6 & BT 5.2 Module - For Sona MT320 2230 Wi-Fi 6 & BT 5.4 Module - The M.2 slot designed on the EVK complies with the M.2 standard pin definition. Please ask the customer to confirm whether their M.2 module meets the M.2 standard pin definition
M.2 Slot Key B x 1 - The M.2 slot designed on the EVK complies with the M.2 standard pin definition. Please ask the customer to confirm whether their M.2 module meets the M.2 standard pin definition
40-Pin 2.54mm Pin Header x 1 (for Raspberry Pi Like I/O Interface)
Micro SIM x 1
Nano SIM x 1
CAN Bus x 1 (RS232 Connector)

Unsupported Board Features

Please refer to Android Releases section for detailed list on supported features.

FTDI board control

The Genio 520-EVK has a FTDI FT232R chip connected to the UART0 (CN3200) port. You can control the power (PWRKEY), reset (SYSRST), and download (KPCOL0) lines through the CBUS lines of the FT232R chip:

FTDI GPIO Line	Function
0	Power (PWRKEY)
1	Reset (SYSRST)
2	Download (KPCOL0)