IoT Yocto v22.2 - 2022 Dec 12
IoT Yocto v22.2 release supports two hardware configurations based on Yocto Kirkstone and Linux 5.15:
Genio 1200 lands on Linux Kernel 5.15 (
mtk-v5.15-dev) and Yocto Kirkstone.Genio 350 has been migrated to Linux Kernel 5.15 (
mtk-v5.15-dev) and Yocto Kirkstone, same as Genio 1200.
Supported Hardware
This release supports following boards based on MT8365(Genio 350) and MT8395(Genio 1200) MediaTek SoC families:
Genio 1200-Demo Board (deprecated in v23.1)
Notable Changes in v22.2
mtk-v5.15-dev kernel is no longer compatible with Yocto Dunfell:
This is due to more drivers being maintained out-of-tree in v22.2, and the changes are not compatible with Dunfell recipes in
meta-mediatek-bsp. If you need to use Yocto Dunfell with Genio 350, please keep usingmtk-v5.10instead.Partition adjustment:
v22.2 merges the
homeandrootfspartitions into a single partition. This allows developers to expand the rootfs partition size to install additional packages for evaluation, without rebuilding the entire image.Additional pre-integrated packages in prebuilt images:
The downloadable prebuilt images (
rity-demo-image) has integrated more packages for evaluation:LTP(xTest)
If you’d like to build images without these additional evaluation packages, please build the new image recipe
rity-bsp-imageinstead.multilib support disabled by default:
v22.2 now disables multilib by default. As a result, there are no
lib64directory in root file system. All the libraries inlibare now 64-bit. You could still enable multilib support for your own projects if 32-bit support is required. However, all the Genio board support prebuilt binaries are available in 64-bit only.Move more proprietary drivers out-of-tree and requires loading additional DTBO:
Drivers that do not conform to upstream Linux LTS 5.15 interfaces or behaviors are being moved outside of kernel source tree, to minimize impact to upstream drivers. In v22.2, the IoT Yocto’s video codec driver for Genio 1200 must be enabled by loading additional DTBO file
video.dtbo:genio-flash --load-dtbo video.dtbo
Prebuilt Images Download
Board |
Prebuilt Image |
MD5 Checksum |
|---|---|---|
fc17b774d6fac072bb212058357aafac |
||
13b8309a8e40b9a6d554e2c665c8b151 |
Public & Private Prebuilt Images
IoT Yocto v22.2 is available in two different packages groups:
You don’t need a GitLab account to download both private and public prebuilt images, but you need to agree to the Software License Agreement.
You don’t need a GitLab account to build the public image configurations.
You need a GitLab account and contracts to MediaTek to access and build the private image.
Public images are built with packages that are available without explicit access permissions to the GitLab group. This lacks some proprietary features, and some proprietary components are provided in binary-only format.
Private images, on the other hand, requires access to private repositories in the GitLab group. In this release, the private image provides these additional features on top of the public configuration:
Xtensa-ANN support on Genio 350-EVK
Neuron SDK support on Genio 1200-demo (deprecated in v23.1)
MT7663 proprietary Wi-Fi driver on Genio 350-EVK
eFuse writer
ISP support on Genio 1200-demo (deprecated in v23.1)
Source Code Download
Important
Please read and agree the Software License Agreement before accessing or using IoT Yocto software. If you do not agree to the terms and conditions of the Software License Agreement, you must not access or use the software.
To download IoT Yocto recipes for v22.2 release, use the tag rity-kirkstone-v22.2 to download Yocto Kirkstone recipes for both Genio 1200 and Genio 350 boards:
repo init -u https://gitlab.com/mediatek/aiot/bsp/manifest.git -b refs/tags/rity-kirkstone-v22.2
To fetch source code and build images using these Yocto recipes, please refer to steps in Get Started with IoT Yocto
Private (NDA) configuration
In v22.2 release configures to public image by default (NDA_BUILD = "0").
To build the private image configuration, set the configuration flag NDA_BUILD = "1" in local.conf:
echo NDA_BUILD = \"1\" >> ${BUILD_DIR}/conf/local.conf
Before building with the bitbake commands.
Please refer to Get Started with IoT Yocto for detailed steps.
Tools
genio-tools is released to load built images to the development boards. Please refer to Get Started with IoT Yocto and Genio Tools for detailed usage.
Please note that there are new DTBOs added in this release:
Major Software Package Versions
Yocto LTS Kirkstone 4.0.5
Linux Kernel based on LTS version 5.15.37
ATF version v2.6
U-Boot upgraded to v2022.10
OPTEE version 3.16
Feature Support Status - MT8395(Genio 1200)
New Features in v22.2 for MT8395(Genio 1200)
A reference secure boot flow support is now available for MT8395 (requires NDA).
Wi-Fi & Bluetooth connectivity module
AzureWave AW-XB468NFnow supports: - additional BlueZ profiles (HID, HoG) - Wi-Fi STA mode.DSI display interface on Genio 1200-Demo board and related multi-display combinations (DSI+DP, DSI+HDMI) are now enabled.
eDP display throughput increase from 2K60Hz to 4K60Hz on MT8395 / Genio 1200-Demo board.
Additional ROS2 Yocto meta-layer support for MT8395 on Kirkstone and Kernel 5.15. This is provided as a separate layer and is not included in prebuilt images.
Ethernet TSN test environment integration for MT8395 / Genio 1200-Demo board. A test guide documentation and pre-test report are provided (requires NDA).
Preliminary support for MT8395 internal ISP and IMX214 sensor. The is support is in early stages and currently it only serves purpose for CSI0 interface hardware verification. (requires NDA). (Note: If MT8395 internal ISP is enabled, there will be additional 125 V4L2 devices under /dev. Please refer to V4L2 Device Node.)
Maximum throughput of the H.264 & H.265 hardware video encoder upgrades to 4K60 from 4K30 for MT8395.
Genio 1200-Demo Board DTBOs in v22.2
Certain external hardware components, and some software modules, are required to be enabled by loading dtbo files. The full list of DTBOs for Genio 1200-Demo board is:
video.dtbo: to enable hardware video encoders and decodersdisplay-dp.dtbo: to enable DisplayPort (will disable the default HDMI output)display-dsi.dtbo: to enable DSI display path and paneldisplay-edp4k.dtbo: to enable 4K eDP display path and panelpanel-boe-ne135fbm.dtbo: to enable 2K eDP display path and panelcamera-imx214-csi0.dtbo: to enable ISP + IMX214 on CSI0
Please refer to this page to load DTBOs during flashing process.
Notable Software Limitations for MT8395(Genio 1200) in v22.2
DisplayPort output only supports DisplayPort over Type C(DPoC), direct output from a DisplayPort connector is not supported.
Low power performance during suspend is not fully optimized.
Feature List for Genio 1200-Demo Board in v22.2
These symbols represent the supporting status:
V: function enabled by software and available on hardware board.O: software integrated but cannot validate due to hardware board limitation.--: not supported in this release; development on-going.
Category |
Feature |
K5.15 + Kirkstone |
Requires NDA/SLA |
|---|---|---|---|
HDK |
Genio 1200-Demo Board |
V |
|
Boot |
Bootloader :: TF-A |
V |
|
Boot |
Bootloader :: U-Boot |
V |
|
Boot |
Boot Storage :: eMMC |
V |
|
Boot |
Boot Storage :: UFS |
O |
|
Boot |
Boot Device :: eMMC |
V |
|
Boot |
Boot Device :: UFS |
O |
|
Boot |
Boot Device :: SD Card |
– |
|
Boot |
Boot Device :: USB |
– |
|
Boot |
OTA |
– |
|
Boot |
SystemReady IR |
– |
|
Linux Kernel |
Version :: Kernel 5.15 |
V |
|
Linux Kernel |
Kernel :: 64-bit |
V |
|
Yocto |
3.1 Dunfell (LTS) |
– |
|
Yocto |
4.0 Kirkstone (LTS) |
V |
|
System |
RTC |
V |
|
System |
Watchdog |
V |
|
Security |
TEE OS :: OP-TEE |
V |
|
Security |
Secure Boot (root of trust) |
V |
V |
Security |
Hardware KDF (Key Derivation Function) |
V |
V |
Security |
Anti-Rollback |
– |
|
Security |
Anti-Clone |
– |
|
Security |
Full Disk Encryption |
– |
|
Security |
File Base Encryption |
– |
|
Security |
SELinux |
– |
|
Power Mgnt |
Suspend to Idle (S0) |
– |
|
Power Mgnt |
Suspend to RAM (S3) |
V |
|
Power Mgnt |
Suspend to Disk (S4) |
– |
|
Power Mgnt |
USB Host Suspend & Remote Wakeup |
V |
|
Power Mgnt |
CPU Idle |
V |
|
Power Mgnt |
CPU Hotplug |
V |
|
Power Mgnt |
Power Charger |
– |
|
Power Mgnt |
PMIC (Regulator Framework) |
V |
|
Power Mgnt |
Clock Manager (Linux CCF) |
V |
|
Power Mgnt |
Thermal Framework (Governor/Cooling) |
V |
|
Power Mgnt |
DVFS :: cpufreq |
V |
|
Power Mgnt |
DVFS :: gpufreq |
V |
|
Power Mgnt |
Auto Power On |
– |
|
Image |
HW Decode :: JPEG |
– |
|
Image |
HW Encode :: JPEG |
V |
|
Image |
GStreamer :: video4linux :: v4l2jpegenc |
V |
|
Video Processing |
MDP (Multimedia Data Path) |
V |
|
Video Processing |
GStreamer :: video4linux :: v4l2convert |
V |
|
Camera |
UVC |
V |
|
Camera |
CAMSV+YUV |
– |
|
Camera |
ISP+RAW |
V |
V |
Camera |
ISP :: AE |
V |
V |
Camera |
ISP :: AWB |
V |
V |
Camera |
ISP :: AF |
O |
V |
Camera |
ISP :: MCNR |
V |
V |
Camera |
Single Sensor :: RAW(4 lane) |
V |
V |
Camera |
Multi-Sensor :: RAW(4 lane)+RAW(4 lane) |
– |
|
Camera |
RAW Sensor :: IMX214 |
V |
|
Camera |
Gstreamer :: video4linux :: v4l2src |
V |
|
Camera |
libcamera :: simplepipe |
– |
|
Video |
HW Decode :: H.264 |
V |
|
Video |
HW Decode :: H.265 |
V |
|
Video |
HW Decode :: VP8 |
V |
|
Video |
HW Decode :: VP9 |
V |
|
Video |
HW Decode :: AV1 |
– |
|
Video |
HW Decode :: MPEG-4 |
V |
|
Video |
HW Encode :: H.264 |
V |
|
Video |
HW Encode :: H.265 |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h264dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h265dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2vp8dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2vp9dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2mpeg4dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h264enc |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h265enc |
V |
|
Display |
TX :: Interface :: DSI |
V |
|
Display |
TX :: Interface :: DSI :: Touch :: Goodix GT9271 |
V |
|
Display |
TX :: Interface :: eDP |
V |
|
Display |
TX :: Interface :: HDMI |
V |
|
Display |
TX :: Interface :: DP (Type-C) |
V |
|
Display |
TX :: Interface :: DP (Direct Output) |
– |
|
Display |
TX :: Single Display :: DSI |
V |
|
Display |
TX :: Single Display :: eDP |
V |
|
Display |
TX :: Single Display :: HDMI |
V |
|
Display |
TX :: Single Display :: DP |
V |
|
Display |
TX :: Multi-Display :: DSI + HDMI |
V |
|
Display |
TX :: Multi-Display :: DSI + DP |
V |
|
Display |
TX :: Multi-Display :: eDP + HDMI |
V |
|
Display |
TX :: Multi-Display :: eDP + DP |
V |
|
Display |
TX :: Multi-Display :: eDP + DSI |
– |
|
Display |
TX :: Multi-Display :: DP + HDMI |
– |
|
Display |
TX :: Multi-Display :: eDP + DP + HDMI |
– |
|
Display |
TX :: Wi-Fi Display |
– |
|
Display |
TX :: Boot Logo |
– |
|
Display |
PQ : Gamma |
– |
|
Display |
Compositor :: Wayland :: Weston |
V |
|
Display |
GStreamer :: waylandsink |
V |
|
Display |
Backend :: Direct Render Manager |
V |
|
Audio |
IN :: PDM :: DMIC |
V |
|
Audio |
IN :: I2S :: PIN |
V |
|
Audio |
IN :: UAC :: 1.0 |
V |
|
Audio |
IN :: Headset :: JACK |
V |
|
Audio |
OUT :: Headset :: JACK |
V |
|
Audio |
OUT :: UAC :: 1.0 |
V |
|
Audio |
OUT :: DP Audio |
V |
|
Audio |
OUT :: HDMI Audio |
V |
|
Audio |
OUT :: I2S :: PIN |
V |
|
Audio |
Jack :: Detection |
– |
|
Audio |
Gstreamer :: alsasink |
V |
|
Audio |
ALSA-lib |
V |
|
GPU |
EGL :: Display Backend :: Wayland |
V |
|
GPU |
Graphics API :: EGL :: 1.4 |
V |
|
GPU |
Graphics API :: OpenGL ES :: 3.2 |
V |
|
GPU |
Graphics API :: Vulkan :: 1.2 |
V |
|
GPU |
Computation API :: OpenCL :: 3.0 |
V |
|
AI/ML |
TFLite Interpreter :: ArmNN Delegate :: CPU Backend |
V |
|
AI/ML |
TFLite Interpreter :: ArmNN Delegate :: GPU Backend |
V |
|
AI/ML |
Neuron SDK :: Neuron Runtime :: APUSYS Backend |
V |
V |
AI/ML |
Neuron SDK :: Compiler :: ncc_tflite |
V |
V |
Peripheral |
I2C |
V |
|
Peripheral |
UART |
V |
|
Peripheral |
UART :: DMA |
– |
|
Peripheral |
USB :: TYPE-C :: MT6360 + IT5205 |
V |
|
Peripheral |
USB :: 2.0 Host Only |
V |
|
Peripheral |
USB :: 2.0 Device Only |
V |
|
Peripheral |
USB :: 2.0 Host+Device (Dual-Role-Switch) |
V |
|
Peripheral |
USB :: 3.0 Host Only |
V |
|
Peripheral |
USB :: 3.0 Device Only |
V |
|
Peripheral |
USB :: 3.0 Host+Device (Dual-Role-Switch) |
V |
|
Peripheral |
PCIe :: Gen2 (1 lane) |
V |
|
Peripheral |
PCIe :: Gen3 (2 lane) |
V |
|
Peripheral |
SPI :: Master |
V |
|
Peripheral |
PWM :: General |
O |
|
Peripheral |
PWM :: Display |
V |
|
Peripheral |
GPIO |
V |
|
Peripheral |
MSDC :: eMMC |
V |
|
Peripheral |
MSDC :: SD Card |
V |
|
Peripheral |
MSDC :: SDIO |
O |
|
Peripheral |
KeyPad Scanner |
– |
|
Peripheral |
Ethernet :: Gigabit (RGMII) |
V |
|
Peripheral |
Ethernet :: TSN (Time Sensitive Network) |
V |
|
Peripheral |
Ethernet :: WoL (Wake-on-Lan) |
– |
|
MT7921 |
PCIe Module :: AzureWave (#AW-XB468NF) |
V |
|
MT7921 |
Wi-Fi :: Wi-Fi 6 |
V |
|
MT7921 |
Bluetooth :: Bluetooth 5.2 |
V |
|
MT7921 |
Bluetooth :: Host :: BlueZ |
V |
|
MT7921 |
Bluetooth :: Host :: BlueZ :: GATT |
V |
|
MT7921 |
Bluetooth :: Host :: BlueZ :: HID |
V |
|
MT7921 |
Bluetooth :: Host :: BlueZ :: HoGP |
V |
|
MT7921 |
Wi-Fi :: WPA3 |
V |
|
MT7921 |
Wi-Fi :: STA |
V |
|
MT7921 |
Wi-Fi :: SoftAP |
– |
|
Modem |
5G :: Quectel T700 PCIe Module |
O |
V |
App Framework |
Qt (Yocto meta-qt) |
V |
|
App Framework |
ROS (Yocto meta-ros) |
V |
|
Tool |
Flash Tool + Download Agent |
V |
|
Tool |
ADB (Android Debug Bridge) |
V |
|
Tool |
SDK :: Yocto SDK |
V |
|
Tool |
Stress Test Suite |
V |
|
Tool |
Benchmark Suite |
V |
|
Tool |
Security :: eFuse Writer |
V |
V |
Tool |
Ethernet :: TSN Test Suite |
V |
V |
Tool |
ISP :: ImagiQ (ISP Tuning Tool) |
– |
|
Tool |
ISP :: CCT (Camera Calibration Tool) |
– |
|
Demo |
AI Demo App (GstInference) |
V |
Known Issues for Genio 1200 in v22.2
ID |
Description |
|---|---|
AUTO00206525 |
[G12000-demo] Video: Once suspend is blocked by USB device mode. Suspend/Resume will fail doing video decode |
AUTO00206411 |
[G12000-demo] Video: Once suspend is blocked by USB device mode. Suspend/Resume will fail doing video encode |
AUTO00205311 |
[G12000-demo] Video: Video playback will terminate after 3.5 hr play in stress test environment |
AUTO00206485 |
[G12000-demo] Video: Kernel Oops when transcoding H.264 FHD content using gstreamer (randomly). Okay with 4K content |
AUTO00201126 |
[G12000-demo] ISP Capture: Random crash after open&close the preview/video/capture streams in stress environment |
AUTO00205100 |
[G12000-demo] ISP Capture: In-consistency exposure result in continues stress capture environment |
AUTO00205170 |
[G12000-demo] ISP Capture: mosaic or broken line on the captured JPEG image (randomly) |
AUTO00203844 |
[G12000-demo] DP: type-c to type-c can’t connect (randomly) |
AUTO00199081 |
[G12000-demo] infra_ao_gce clock core unprepared when entering suspend mode |
AUTO00207435 |
[G12000-demo] wifi: failed to set network with WPA3-SAE |
Feature Support Status - MT8365(Genio 350)
New Features in v22.2 for MT8365(Genio 350)
Genio 350 has migrated to Kernel v5.15 and Yocto Kirkstone.
H.265 hardware video encoder support enabled for Genio 350.
Genio 350-EVK Board DTBOs in v22.2
Certain external hardware components, and some software modules, are required to be enabled by loading dtbo files. The full list of DTBOs for Genio 350-EVK board is:
video.dtbo: to enable hardware video encoders and decoderscamera-ap1302-ar0430-single-csi0.dtbo: to enable single camera module on CSI0camera-ap1302-ar0430-single-csi1.dtbo: to enable single camera module on CSI1camera-ap1302-ar0430-dual.dtbo: to enable both camera modules on both CSI0 and CSI1net-ethernet.dtbo: to enable the ethernet port (disables the default HDMI output)panel-startek-kd070fhfid015.dtbo: to enable the DSI panel
Please refer to this page to load DTBOs during flashing process.
Notable Software Limitations for MT8365(Genio 350) in v22.2
Low power performance during suspend is not optimized for MT8365(Genio 350).
Feature List for Genio 350-EVK Board in v22.2
These symbols represent the supporting status:
V: function enabled by software and available on hardware board.O: software integrated but cannot validate due to hardware board limitation.--: not supported in this release; development on-going.
Category |
Feature |
K5.15 + Kirkstone |
Requires NDA/SLA |
|---|---|---|---|
HDK |
Genio 350-EVK |
V |
|
Boot |
Bootloader :: TF-A |
V |
|
Boot |
Bootloader :: U-Boot |
V |
|
Boot |
Boot Storage :: eMMC |
V |
|
Boot |
Boot Device :: eMMC |
V |
|
Boot |
Boot Device :: SD Card |
– |
|
Boot |
Boot Device :: USB |
– |
|
Boot |
OTA |
– |
|
Linux Kernel |
Version :: Kernel 5.15 |
V |
|
Linux Kernel |
Kernel :: 64-bit |
V |
|
Yocto |
3.1 Dunfell (LTS) |
– |
|
Yocto |
4.0 Kirkstone (LTS) |
V |
|
System |
RTC |
V |
|
System |
Watchdog |
V |
|
Security |
TEE OS :: OP-TEE |
V |
|
Security |
Secure Boot (root of trust) |
V |
V |
Security |
Hardware KDF (Key Derivation Function) |
V |
V |
Security |
Anti-Rollback |
– |
|
Security |
Anti-Clone |
– |
|
Security |
Full Disk Encryption |
– |
|
Security |
File Base Encryption |
– |
|
Security |
SELinux |
– |
|
Power Mgnt |
Suspend to Idle (S0) |
– |
|
Power Mgnt |
Suspend to RAM (S3) |
V |
|
Power Mgnt |
Suspend to Disk (S4) |
– |
|
Power Mgnt |
USB Host Suspend & Remote Wakeup |
V |
|
Power Mgnt |
CPU Idle |
V |
|
Power Mgnt |
CPU Hotplug |
V |
|
Power Mgnt |
Power Charger |
– |
|
Power Mgnt |
PMIC (Regulator framework) |
V |
|
Power Mgnt |
Clock Manager (Linux CCF) |
V |
|
Power Mgnt |
Thermal framework (Governor/Cooling) |
V |
|
Power Mgnt |
DVFS :: cpufreq |
V |
|
Power Mgnt |
DVFS :: gpufreq |
V |
|
Power Mgnt |
Auto Power On |
– |
|
Image |
HW Decode :: JPEG |
– |
|
Image |
HW Encode :: JPEG |
– |
|
Video Processing |
MDP (Multimedia Data Path) |
V |
|
Video Processing |
GStreamer :: video4linux :: v4l2convert |
V |
|
Camera |
UVC |
V |
|
Camera |
CAMSV+YUV |
V |
|
Camera |
ISP+RAW |
– |
|
Camera |
Single Sensor :: YUV(4 lane) |
V |
|
Camera |
Multi-Sensor :: YUV(4 lane)+YUV(4 lane) |
V |
|
Camera |
YUV Sensor :: OnSemi AP1302+AR0430 |
V |
|
Camera |
Gstreamer :: video4linux :: v4l2src |
V |
|
Camera |
libcamera :: simplepipe |
V |
|
Video |
HW Decode :: H.264 |
V |
|
Video |
HW Decode :: H.265 |
V |
|
Video |
HW Decode :: VP8 |
V |
|
Video |
HW Decode :: VP9 |
V |
|
Video |
HW Decode :: AV1 |
– |
|
Video |
HW Decode :: MPEG-4 |
V |
|
Video |
HW Encode :: H.264 |
V |
|
Video |
HW Encode :: H.265 |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h264dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h265dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2vp8dec |
||
Video |
GStreamer :: video4linux2 :: v4l2vp9dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2mpeg4dec |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h264enc |
V |
|
Video |
GStreamer :: video4linux2 :: v4l2h265enc |
V |
|
Display |
TX :: Interface :: DSI |
V |
|
Display |
TX :: Interface :: DSI :: Touch :: Goodix GT9271 |
V |
|
Display |
TX :: Interface :: DPI to HDMI Bridge:: IT66121FN |
V |
|
Display |
TX :: Multi-Display :: DSI + HDMI |
V |
|
Display |
TX :: Wi-Fi Display |
– |
|
Display |
TX :: Boot Logo |
– |
|
Display |
PQ : Gamma |
– |
|
Display |
Compositor :: Wayland :: Weston |
V |
|
Display |
GStreamer :: waylandsink |
V |
|
Display |
Backend :: Direct Render Manager |
V |
|
Audio |
IN :: PDM :: DMIC |
V |
|
Audio |
IN :: I2S :: AMIC |
V |
|
Audio |
IN :: UAC :: 1.0 |
V |
|
Audio |
IN :: Headset :: JACK |
V |
|
Audio |
OUT :: Analog :: JACK |
V |
|
Audio |
OUT :: Headset :: JACK |
V |
|
Audio |
OUT :: UAC :: 1.0 |
V |
|
Audio |
OUT :: HDMI Audio |
V |
|
Audio |
Jack :: Detection |
– |
|
Audio |
Gstreamer :: alsasink |
V |
|
Audio |
ALSA-lib |
V |
|
GPU |
EGL :: Display Backend :: Wayland |
V |
|
GPU |
Graphics API :: EGL :: 1.4 |
V |
|
GPU |
Graphics API :: OpenGL ES :: 3.2 |
V |
|
GPU |
Graphics API :: Vulkan :: 1.2 |
V |
|
GPU |
Computation API :: OpenCL :: 3.0 |
V |
|
AI/ML |
TFLite Interpreter :: ANN Delegate :: VP6 Backend |
V |
V |
AI/ML |
TFLite Interpreter :: ArmNN Delegate :: CPU Backend |
V |
|
AI/ML |
TFLite Interpreter :: ArmNN Delegate :: GPU Backend |
V |
|
Peripheral |
I2C |
V |
|
Peripheral |
UART |
V |
|
Peripheral |
UART :: DMA |
– |
|
Peripheral |
USB :: 2.0 Host Only |
V |
|
Peripheral |
USB :: 2.0 Host+Device (Dual-Role-Switch) |
V |
|
Peripheral |
SPI :: Master |
V |
|
Peripheral |
PWM :: General |
V |
|
Peripheral |
PWM :: Display |
V |
|
Peripheral |
GPIO |
V |
|
Peripheral |
MSDC :: eMMC |
V |
|
Peripheral |
MSDC :: SD Card |
V |
|
Peripheral |
MSDC :: SDIO |
V |
|
Peripheral |
KeyPad Scanner |
V |
|
Peripheral |
Ethernet :: 10M/100M (RMII) |
V |
|
Peripheral |
Ethernet :: WoL (Wake-on-Lan) |
– |
|
MT7663 |
SDIO Module :: AzureWave (AW-CB451NF) |
V |
|
MT7663 |
Wi-Fi :: Wi-Fi 5 |
V |
V |
MT7663 |
Wi-Fi :: WPA3 :: STA |
V |
V |
App Framework |
Qt (Yocto meta-qt) |
V |
|
App Framework |
ROS (Yocto meta-ros) |
V |
|
Tool |
Flash Tool + Download Agent |
V |
|
Tool |
ADB (Android Debug Bridge) |
V |
|
Tool |
SDK :: Yocto SDK |
V |
|
Tool |
Stress Test Suite |
V |
|
Tool |
Benchmark Suite |
V |
|
Tool |
Security :: eFuse Writer |
V |
V |
Demo |
AI Demo App (GstInference) |
V |
Known Issues for Genio 350 in v22.2
ID |
Description |
|---|---|
AUTO00206514 |
[G350-EVK] Video: Video playback will start to jitter after 1 hr play in stress test environment |
AUTO00200978 |
[G350-EVK] HDMI: Display may observe some broken line when screen content changes rapidly (special scenario) |
AUTO00207429 |
[G350-EVK] Camera: AR0430+AP1302 camera module will freeze if it is under a low ambient light environment during the boot process |