Ports of Genio 1200-EVK

With rity-demo-image, there are several options to connect your host PC to the Genio 1200-EVK:

Connect to UART Port: The UART0 port provides access to bootloader and kernel console with rity-demo-image.
USB: The USB0 (USB port 0) port is mapped to a micro USB connector labelled as USB-C D/L. It provides following functions:
- Image Download: You can program the on-board storage (EMMC) through this port with flash tools.
- RNDIS (Windows): The USB-C D/L port is configured as an RNDIS device to provide “virtual” ethernet connections to the board with USB cable.
- The USB-C D/L port also exposes an Android Debugging Bridge(ADB) device for easy access with the adb utility on host PC. Only adb push, adb pull, adb shell commands are supported.
Mass Storage: The Micro USB port is configured to provide a FAT32 mass storage device when connected to host PC.