Ports of Genio 350-EVK

With rity-demo-image, there are several options to connect your host PC to the Genio 350-EVK board:

• Connect to UART Port: The UART0 port provides access to bootloader and kernel console with rity-demo-image.

• CDC-ECM (Linux) and RNDIS (Windows): The USB0 port can be configured as a ECM device or an RNDIS device, to provide “virtual” ethernet connections to the board with USB cable.

The location of the UART and USB ports on Genio 350-EVK are shown below:

Location of UART0, USB0, and LAN port in Genio 350-EVK