Ports of Genio 1200-demo Board

With rity-demo-image, there are several options to connect your host PC to the Genio 1200-Demo Board:

  • Connect to UART Port: The UART0 port provides access to bootloader and kernel console with rity-demo-image.

  • CDC-ECM (Linux) and RNDIS (Windows): The USB0 port can be configured as a ECM device or an RNDIS device, to provide “virtual” ethernet connections to the board with USB cable.

The location of the UART0 and USB ports on Genio 1200-Demo Board are shown below:

../../../../_images/hw_evk_i1200-demo-board_ports.jpg

Genio 1200-demo Board Ports

Note

Use the USB Type C CON4 port for image flashing and also connecting to the board as a CDC-ECM device.