.. include:: /keyword.rst

=====================
Flash Image to Boards
=====================

The flashing process is performed over a USB connection between the target board and the host computer containing the image.

.. note::

    Make sure you have install **Genio tools** on your :doc:`Linux <env-setup/flash-env-linux>` or :doc:`Windows <env-setup/flash-env-windows>` host before continuing the process.


For detailed steps, visit the following pages:

.. toctree::
   :titlesonly:

   flash/flash-g350-evk
   flash/flash-g700-evk
   flash/flash-g1200-evk
   Troubleshooting (Windows) <flash/flash-troubleshoot-windows>

.. note::

	These pages are only a quick guide on using Genio Tools to flash images,
	Please read :doc:`/tools/genio-tools` in order to get the most out of Genio Tools.