.. include:: /keyword.rst

=============================
Ports of |i350-EVK-REF-BOARD|
=============================

With ``rity-demo-image``, there are several options to connect your host PC to the |i350-EVK-REF-BOARD|:

* :doc:`uart`: The ``UART0`` port provides access to bootloader and kernel console with rity-demo-image.
* **USB**: The SoC ``USB0`` port is a micro-USB connector lablled as ``USB0`` on  |i350-EVK-REF-BOARD|. 
  It supports following functions:

    * :doc:`RNDIS (Windows) <rndis-windows>`: The ``USB0`` port is configured as an RNDIS device, to provide "virtual" ethernet connections to the board with USB cable.
    * **ADB**: The ``USB0`` port is also configured as an Android Debugging Bridge(ADB) device.

The location of the ``UART0`` and ``USB0`` ports on Genio 350-EVK are shown below:

.. figure:: /_asset/hw_evk_g350-evk_ports.png
    :alt: Ports of |i350-EVK-REF-BOARD| main board
    :align: center
    :width: 65%

    Location of UART0, USB0, and LAN port in Genio 350-EVK