.. include:: /keyword.rst

=================
Genio 520/720-EVK
=================

.. contents:: Sections
	:local:
	:depth: 4

Overview
========
Genio 520/720-EVK board is an evaluation kit of MediaTek. The provided low power data may vary due to hardware differences and has a tolerance of 10% error. These data are for reference only.

Measurement Settings
====================

- Software Version : v25.1

- Operating Voltage : 4.2 V

- The LEDs on board and some power related modules need to be removed before measurement.
	1. System LEDs : R3821, R3818, R3819
	2. System Power : R2046, R1206

- Connect power supply to EVK and start measurement.
	1. J513 (+)
	2. J512 (-)

.. _720power-supply:

.. figure:: /_asset/low-power_720EVK.png
    :alt: Power-Supply
    :align: center
    :width: 65%

    Power-Supply

Power Consumption of Genio 520/720-EVK
======================================

The following is the power consumption data of Suspend and Idle, and we will provide the measurement SOP.

.. csv-table:: Table 1. Low Power Data of G720-EVK
	:class: longtable
	:file: /_asset/tables/lowpower-g720-25_1.csv
	:width: 65%
	:widths: 40 40 40 

.. csv-table:: Table 2. Low Power Data of G520-EVK
	:class: longtable
	:file: /_asset/tables/lowpower-g520-25_1.csv
	:width: 65%
	:widths: 40 40 40 
	
Suspend
****************

* Step 1 : Power on DUT

* Step 2 : Wait for the system to initialize, about 1-2 minutes

* Step 3 : Set the system to suspend mode.

	.. code-block::

		echo mem > /sys/power/state

* Step 4 : The console cannot input commands, which means it enters suspend

* Step 5 : Wait for 1 minute and start measuring


Idle
****************

* Step 1 : Power on DUT

* Step 2 : Wait for the system to initialize, about 1-2 minutes

* Step 3 : Turn off some extra services
	
	.. code-block::

		systemctl stop NetworkManager.service
		echo off > /sys/class/drm/card0-DSI-1/status

* Step 4 : Wait for 1 minute and start measuring